Converting retired Li-ion battery anodes by this process might help with recycling the batteries. Certainly being able to recycle more than 1% would be a great help.
Researchers at the University of Virginia (UVA) have devised a process for converting retired Li-ion battery anodes to graphene and graphene oxide (GO). A paper on the work is published in the ACS journal Nano Letters.
The diagram shows “Schematic illustration of the proposed smart fabrication of graphene and graphene oxide from end-of-life batteries. Zhang et al.”

… accompanying the booming expansion of the Li-ion battery market, a tremendous amount of batteries retire every year and most of them are disposed of in landfills, which not only causes severe waste of precious sources but also induces hazardous soil contamination due to the plastic components and toxic electrolytes. So far, only 1% of end-of-life Li-ion batteries have been recycled. Apparently, it is an urgent necessity to develop effective battery recycling techniques.
… A rational strategy to simultaneously solve the environmental issues from waste batteries and graphite mining is to fabricate graphene directly from end-of-life battery anodes.
… Here, graphite powders from end-of-life Li-ion battery anodes were used to fabricate graphene.

—Zhang et al.

The lithiation aided pre-expansion enabled 4 times enhancement of graphene productivity by shear mixing, the researchers found.
The graphene fabrication was seamlessly inserted into the currently used battery recycling streamline in which acid treatment was found to further swell the graphite lattice, pushing up the graphene productivity to 83.7% (10 times higher than that of pristine graphite powders).
The findings present a new promise for smartly recycling Li-ion batteries.

—Zhang et al.

UVA researchers devise method for converting retired Li-ion anodes to graphene and GO
Source: Alerts

More graphene news over here

Spread the graphene