“The Graphosite project is designed to respond to the need for enhanced defect detection techniques in composites, driven by the increased use of composites in the aviation, automotive and marine industries, and in civil structures.”
“A research consortium has been awarded funding by Innovate UK for the Graphosite project, aimed at creating a graphene sensor that will be able to detect defects in composite materials during both the manufacturing process and the normal service life of a component.
The consortium consists of ADVISE-DETA, Haydale, Cambridge Nanomaterials Technology Ltd, DZP Technologies, Brunel University London (through the Brunel Composites Innovation Centre) and TWI Ltd has won funding from Innovate UK for its Graphosite project. The project began in late 2018 and will finish in January 2021.
According to TWI, the most common defect during the manufacturing process of composite materials is porosity, which can be critical as it can cause mechanical performance issues such as inter-laminar shear stress. In-service damage is mainly caused by impact, resulting in internal delamination.
The most commonly used non-destructive techniques for composites, TWI says, are ultrasonic inspection, creation of a 2D C-scan map showing delamination or defects; strain gauges; and the coin tap test that indicates damage to an element due to stiffness change.
The graphene sensor under development is intended to address limits in traditional measurement, such as only being able to measure the defect in one direction, and detecting failure only when the part is placed on the particular surface of interest. The main characteristics of the new sensor are said to be increased sensitivity and high flexibility due to the presence of graphene.”
Read full article at Graphene sensor under development by research consortium
Source: Composites World
Image: “A typical structure of a graphene field effect transistor based on Si/SiO2 at a molecular level with a graphene sheet as the sensing element.”